Endress+Hauser HMX50 - Dimensions; Installation; DIN Mounting Rail

10
Endress+Hauser
HART Loop Converter HMX50
2.3 Dimensions
A0034621
Number of terminal blocks max. 10
• Dimension drawing with screw terminals
• When using screw terminals with test sockets the device is 124 mm (4.9 in) in height.
• When using spring terminals the device is 131 mm (5.16 in) in height.
• Housing Type C3
3 Installation
3.1 DIN Mounting Rail
The devices are mounted on a 35 mm DIN mounting rail according to EN 60715.
115 (4.53)
119 (4.69)
40 (1.57)
105 (4.13)
7 (0.28)
BA00371FEN_1417.fm Page 10 Tuesday, August 15, 2017 4:08 PM