Endress+Hauser HMX50 - Page 46

46
Endress+Hauser
HART Loop Converter HMX50
Output → Iout3
Assignment disabled
Characteristic 4 - 20 NE 43
Start value 0.000
End value 100.0
Fault current down
Output → Rel1
Trip value On (selected)
Trip value → Assignment
disabled
Trip value → Min/Max
min
Trip value → Trip point
80.00
Trip value → Hysteresis
10.00
Trip value → Operating mode
passive
Trip value → Restart inhibit
OFF
Trip value → Responce delay
0 s
Fault message not selected
Menu Parameters Default setting Custom value
BA00371FEN_1417.fm Page 46 Tuesday, August 15, 2017 4:08 PM