iTEMP TMT84 Incoming acceptance and product identification
Endress+Hauser 7
3
11-42V
012345678910
xx.yy.zz
TMT82- XXXXX/XX
iTEMP
Made in Germany 201x
D-87484 Nesselwang
Ser.no.:
FW:
Input:
12345678ABCDEFGH
12345678ABCDEFGH
Dev.Rev: x
Ext. ord. cd.:
XXXXXXXXXXXXX#
1
2
4
5
6
7
A0014561
1 Nameplate of the head transmitter (example, Ex version)
1 Power supply, current consumption and radio approval (Bluetooth)
2 Serial number, device revision, firmware version and hardware version
3 Data Matrix 2D code
4 2 lines for the TAG name and extended order code
5 Approval in hazardous area with number of the relevant Ex documentation (XA...)
6 Approvals with symbols
7 Order code and manufacturer ID
3.2.2 Name and address of manufacturer
Name of manufacturer: Endress+Hauser Wetzer GmbH + Co. KG
Address of manufacturer: Obere Wank 1, D-87484 Nesselwang or www.endress.com
Address of manufacturing plant: See nameplate
3.3 Scope of delivery
The scope of delivery of the device comprises:
• Temperature transmitter
• Mounting material, optional
• Additional documentation for devices which are suitable for use in the hazardous area
(ATEX, FM, CSA)
3.4 Certificates and approvals
The device complies with the requirements of the standards EN 61 010-1 "Safety
Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use" and
with the EMC requirements as per the IEC/EN 61326 series.
3.4.1 CE/EAC mark, Declaration of Conformity
The device meets the legal requirements of the EU/EEU guidelines. The manufacturer
confirms that the device is compliant with the relevant guidelines by applying the CE/EAC
mark.
3.4.2 PROFIBUS
®
PA protocol certification
The temperature transmitter is certified and registered by the PNO (PROFIBUS
®
User
Organization). The device meets the requirements of the following specifications:
To Next Page
Loading...
