Endress+Hauser Levelflex FMP51 Modbus - Device Operation Options

Levelflex FMP51 Modbus Operation options
Endress+Hauser 23
≤ 3 (0.12)
1.
2.
A0035427
 3 Engineering unit: mm (in)
To remove cables from the terminal:
1. Using a flat-blade screwdriver ≤ 3 mm, press down on the slot between the two terminal
holes
2. Simultaneously pull the cable end out of the terminal.
7 Operation options
The device can be operated as follows:
• Operation via operating menu (display)
• DeviceCare and Fieldcare, see Operating Instructions
• SmartBlue (app), Bluetooth (optional), see Operating Instructions