Endress+Hauser Levelflex FMP51 - Mapping Wizard

Operating menu Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
172 Endress+Hauser
17.3.1 "Mapping" wizard
The Mapping wizard is only available when operating via the local display. When
operating via an operating tool, all parameters concerning the mapping are located
directly in the Setup menu (→  159).
In the Mapping wizard two parameters are displayed simultaneously on the display
module at any one time. The upper parameter can be edited, whereas the lower
parameter is displayed for reference purposes only.
Navigation  Setup → Mapping
Confirm distance 
Navigation  Setup → Mapping → Confirm distance
Description →  169
Mapping end point 
Navigation  Setup → Mapping → Map. end point
Description →  171
Record map 
Navigation  Setup → Mapping → Record map
Description →  171
Distance
Navigation  Setup → Mapping → Distance
Description →  164