Endress+Hauser Levelflex FMP55 HART - Page 36

Electrical connection Levelflex FMP55 HART
36 Endress+Hauser
7.
A0032468
Connect the cable in accordance with the terminal assignment →  21.
8. If using shielded cables: Connect the cable shield to the ground terminal.
9. Fit the cover of the connection compartment back on.
10. If present, turn the cover lock so that it is located over the edge of the cover and then
tighten.
7.2.1 Plug-in spring-force terminals
In the case of devices without integrated overvoltage protection, electrical connection is via
plug-in spring-force terminals. Rigid conductors or flexible conductors with ferrules can be
inserted directly into the terminal without using the lever, and create a contact automatically.
≤ 3 (0.12)
1.
2.
A0013661
 12 Dimensions: mm (in)