Endress+Hauser Liquistation CSF48 - Page 35

Liquistation CSF48 Electrical connection
Endress+Hauser 35
6.1.4 Sensor types with Memosens protocol
Sensors with Memosens protocol
Sensor types Sensor cable Sensors
Digital sensors without
additional internal power
supply
With plug-in
connection and
inductive signal
transmission
• pH sensors
• ORP sensors
• Combined sensors
• Oxygen sensors (amperometric and optical)
• Conductivity sensors with conductive measurement of
conductivity
• Chlorine sensors (disinfection)
Fixed cable Conductivity sensors with inductive measurement of
conductivity
Digital sensors with additional
internal power supply
Fixed cable • Turbidity sensors
• Sensors for interface measurement
• Sensors for measuring the spectral absorption coefficient
(SAC)
• Nitrate sensors
• Optical oxygen sensors
• Ion-sensitive sensors
6.1.5 Connecting sensors with Memosens protocol
In the case of a single-cannel device:
The left-hand Memosens input on basic module must be used!