Endress+Hauser Liquistation CSF48 - Page 40

Electrical connection Liquistation CSF48
40 Endress+Hauser
When connecting to an internal voltage source, use the terminal connection on the rear of the
dosing compartment. The connection is located on the lower terminal strip (on the far left, +
and -), (→  53)
6.2.4 Binary outputs
246
245
146
145
1
2
+
-
+
-
+
-
+
-
292
291
192
191
A0013382
 32 Assignment of binary outputs 1 and 2
1 Binary output 1 (145/146)
1 Binary output 2 (245/246)
145
146
-
-
+
+
A0013407
 33 Binary output with external voltage source
When connecting to an internal voltage source, use the terminal connection on the rear of the
dosing compartment. The connection is located on the lower terminal strip (on the far left, +
and -) (→  53)