Endress+Hauser Liquistation CSF48 - Page 59

Liquistation CSF48 Operation options
Endress+Hauser 59
7.2.2 Configuration options
Display only
• You can only read the values but cannot change them.
• Typical read-only values are: sensor data and system information
Picklists
• You receive a list of options. In a few cases, these also appear in the form of multiple choice
boxes.
• Usually you just select one option; in rare instances you select one or more options.
Numerical values
• You are changing a variable.
• The maximum and minimum values for this variable are shown on the display.
• Configure a value within these limits.
Actions
• You trigger an action with the appropriate function.
• You know that the item in question is an action if it is preceded by the following symbol:
• Examples of typical actions include:
• Deleting log entries
• Saving or loading configurations
• Triggering cleaning programs
• Examples of typical actions include:
• Start a sampling program
• Start manual sampling
• Saving or loading configurations
•
User-defined text
• You are assigning an individual designation.
• Enter a text. You can use the characters in the editor for this purpose (upper-case and
lower-case letters, numbers and special characters).
• Using the soft keys, you can:
• Cancel your entries without saving the data ()
• Delete the character in front of the cursor (
)
• Move the cursor back one position ( )
• Finish your entries and save ()