Liquistation CSF48 System integration
Endress+Hauser 67
‣
Connect the Modbus data cable to the terminals of the fieldbus module (RS 485) or to the
RJ45 socket of the BASE2 module (TCP) as described.
For detailed information on "Modbus communication", see the product pages on the
Internet (→ SD01189C).
EtherNet/IP
With the BASE2 module and the appropriate device version, you can communicate via
EtherNet/IP.
‣
Connect the EtherNet/IP data cable to the RJ45 socket of the BASE2 module.
For detailed information on "Ethernet/IP communication", see the product pages on the
Internet (→ SD01293C).
PROFINET
With the BASE2 module and the appropriate device version, you can communicate via
PROFINET.
‣
Connect the PROFINET data cable to the RJ45 socket of the BASE2 module.
For detailed information on "PROFINET communication", see the product pages on the
internet (→ SD02490C).
To Next Page
Loading...
