Endress+Hauser Liquisys M CLM253 - Installation Conditions; Field Device

Liquisys M CLM223/253 Installation
Endress+Hauser 13
4.2 Installation conditions
4.2.1 Field device
Pg 7
Pg 16
M 5
11 (0.43)
Ø 6 (0.24)
115 (4.53)
157 (6.18)
247 (9.72)
70 (2.76)
70 (2.76)
154 (6.06)
170 (6.69)
Pg 13.5
A0024637
 2 Field device, dimensions in mm (inch)
There is a hole in the perforation for the cable entry (connection of supply voltage). It
serves as a pressure balance during air shipment. Make sure no moisture penetrates
the inside of the housing before the cable installation. The housing is completely air-
tight after cable installation.