Endress+Hauser Liquisys M CLM253 - Panel-mounted Device Mounting; Post-installation Check

Liquisys M CLM223/253 Installation
Endress+Hauser 17
4.3.2 Panel-mounted device
The panel-mounted device is secured with the tensioning screws supplied →  8
The necessary installation depth is approx. 165 mm (6.50").
1
2
3
3
3
92 (3.62
+0.5 +0.02
)
92 (3.62
+0.5 +0.02
)
90 (3.54)
57 (2.24)
33 (1.30)
~ 25 (0.98)
139 (5.47)
max. 45 (1.77)
6 (0.24)
96 (3.78)
~ 165 (6.50)*
92 (3.62)
A0024639
 8 Dimensions in mm (inch)
1 Mounting plate
2 Seal
3 Tensioning screws
* Necessary installation depth
4.4 Post-installation check
• After installation, check the transmitter for damage.
• Check whether the transmitter is protected against moisture and direct sunlight (e.g. by
the weather protection cover).