Endress+Hauser Micropilot FMR53 - Page 64

Micropilot FMR53, FMR54
64 Endress+Hauser
FMR53 with flange
R
A
B
100 (3.94)
102 (4.02)
b
b
øD
ø33 (1.3)
ø33 (1.3)
øD
L1
L1
L2 L2
A0023390
 29 Dimensions of device with flange. Unit of measurement mm (in)
A Process connection: flange 316/316L (without cladding)
B Process connection: flange PTFE>316L (cladded)
R Reference point of measurement
L1 Length of antenna
L2 Inactive length
Antenna L1 L2
Rod 390mm/15" 390 mm (15.4 in) 100 mm (3.94 in)
Rod 540mm/21" 540 mm (21.3 in) 250 mm (9.84 in)
Flanges as per EN1092-1 (suitable for DIN2527)
Nominal diameter Pressure rating b ØD
DN50 PN10/16 18 mm (0.71 in) 165 mm (6.5 in)
DN80 PN10/16 20 mm (0.79 in) 200 mm (7.87 in)
DN80 PN25/40 24 mm (0.94 in) 200 mm (7.87 in)
DN100 PN10/16 20 mm (0.79 in) 220 mm (8.66 in)
DN150 PN10/16 22 mm (0.87 in) 285 mm (11.2 in)
Flanges as per ASME B16.5
Nominal diameter Pressure rating b ØD
2" 150 lbs 17.5 mm (0.69 in) 150 mm (6 in)
3" 150 lbs 22.3 mm (0.88 in) 190 mm (7.5 in)
3" 300 lbs 27 mm (1.1 in) 210 mm (8.25 in)
4" 150 lbs 22.3 mm (0.88 in) 230 mm (9 in)
4" 300 lbs 30.2 mm (1.19 in) 255 mm (10 in)
6" 150 lbs 23.9 mm (0.94 in) 280 mm (11 in)