Micropilot FMR53, FMR54
Endress+Hauser 89
Test, certificate
Feature 580
"Test, certificate"
Designation
JA 3.1 Material documentation, wetted metal parts, EN10204-3.1 inspection certificate
JB Conformity to NACE MR0175, wetted metallic parts
JD 3.1 Material certificate, pressurized parts, EN10204-3.1 inspection certificate
JE Conformity to NACE MR0103, wetted metallic parts
JF Declaration of Conformity AD2000, wetted metal parts:
Material conformity for all metal wetted/pressurized parts according to AD2000 (data
sheets W2, W9, W10)
KD Helium leak test, internal procedure, inspection certificate
KE Pressure test, internal procedure, inspection certificate
KG 3.1 Material certificate+PMI test (XRF), internal procedure, wetted metallic parts,
EN10204-3.1 inspection certificate
KP Penetrant testing AD2000-HP5-3(PT), wetted/pressurized metal parts, inspection
certificate
KQ Penetrant testing ISO23277-1 (PT), wetted/pressurized metal parts, inspection certificate
KR Penetrant testing ASME VIII-1 (PT), wetted/pressurized metal parts, inspection certificate
KS Welding documentation, wetted/pressurized seams
Consists of:
• Drawing
• WPQR (Welding Procedure Qualification Report)
• WPS (Welding Process Specification)
• Manufacturer's Declaration
KV Declaration of Conformity ASME B31.3:
The construction, the material used, the pressure and temperature ranges and the labeling
of the devices meet the requirements of ASME B31.3
Test reports, declarations and inspection certificates are available in electronic format in the
W@M Device Viewer:
Enter the serial number that appears on the device (www.endress.com/deviceviewer)
This concerns the options for the following order codes:
• 550 "Calibration"
• 580 "Test, certificate"
Hard-copy product
documentation
Hard-copy versions of the test reports, declarations and inspection certificates can also be order via
order code 570 "Service", option I7 "Hard-copy product documentation". The documents are then
supplied with the product.
To Next Page
Loading...
