Micropilot FMR53, FMR54
Endress+Hauser 35
Installation
Installation conditions Orientation
A0016882
• Recommended distance A wall - nozzle outer edge: ~ 1/6 of the vessel diameter. However, the
device must not under any circumstances be mounted closer than 30 cm (11.8 in) to the tank wall.
• Not in the center (2) as interference can cause signal loss.
• Not above the filling curtain (3).
• The use of a weather protection cover (1) is recommended to protect the transmitter from direct
sunlight or rain.
To Next Page
Loading...
