Micropilot FMR60
52 V. 4, Rev. 2, 19-03-2018 Endress+Hauser
Feature 100 in the product structure Process connection
RGJ Thread ANSI MNPT1-1/2, 316L
• Process connections that do not have CRN approval are not listed in this table.
• Please refer to the product structure to discover which process connections are available for a
specific device type.
• CRN-approved devices bear the registration number (tbd.) on the nameplate.
An additional pressure restriction applies for the device versions listed in the table below if they
are CRN-approved. The pressure range indicated in the "Process" section → 32 continues to
apply for device versions not listed in the table below (in preparation).
To Next Page
Loading...
