Endress+Hauser NRF81 - Page 87

Tankside Monitor NRF81 Diagnostics and troubleshooting
Endress+Hauser 87
11.2.2 Calling up remedial measures
X X X X X X XX X XX X X X X XX X
S
S
XX
20.50
X
i
S801
Menu
S
(ID:203)
S801
1
2
4
5
6
3
1.
2.
3.
YYYY-MM-DD HH:MM:SS
S801 Supply voltage
Diagnostic list
Diagnostics 1
Diagnostics 2
Diagnostics 3
Supply voltage
Supply voltage
Increase supply voltage
A0032957-EN
 42 Message for remedial measures
1 Diagnostic information
2 Short text
3 Service ID
4 Diagnostic behavior with diagnostic code
5 Operation time of occurrence
6 Remedial measures
A diagnostic message appears in the standard view (measured value display).
1. Press  ( symbol).
 The Diagnostic list submenu opens.
2. Select the desired diagnostic event with  or  and press  .
 The message for the remedial measures for the selected diagnostic event opens.
3. Press  +  simultaneously.
 The message for the remedial measures closes.
The user is in the Diagnostics menu at an entry for a diagnostics event, e.g. in the
Diagnostic list submenu or in the Previous diagnostics.
1. Press .
 The message for the remedial measures for the selected diagnostic event opens.
2. Press  +  simultaneously.
 The message for the remedial measures closes.