Need help?Do you have a question about the Endress+Hauser Prothermo NMT81 and is the answer not in the manual?
General| Brand | Endress+Hauser |
|---|---|
| Model | Prothermo NMT81 |
| Category | Measuring Instruments |
| Language | English |
Explains the purpose and scope of the operating instructions for the device lifecycle.
Details symbols, notations, and conventions used throughout the manual.
Lists available documentation types and sources on the Endress+Hauser website.
Specifies qualifications, authorization, and knowledge required for personnel.
Defines the intended application and conditions for the measuring device.
Details the device's design and compliance with safety standards.
Describes the physical design and key features of the Prothermo NMT81.
Outlines the checks to perform upon receiving the goods.
Explains the methods for identifying the measuring device.
Details storage conditions and transport guidelines for the device.
Provides dimensions and basic information for the converter unit.
Details the installation of the converter with a universal coupling.
Details the installation of the converter with an M20 thread.
Explains the installation of the converter with an average temperature probe.
Describes the design and features of the Water Bottom (WB) probe.
Outlines the general steps for installing the NMT81 device.
Specific procedures for mounting the device on cone roof tanks.
Specific procedures for mounting the device on floating roof tanks.
Specific procedures for mounting the device on pressurized tanks.
Covers intrinsically safe HART communication wiring and terminals.
Details intrinsically safe connections to NMS8x, NMR8x, and NRF81.
Provides steps for the mechanical connection of converter-only units.
Lists methods for operating the NMT81 device (keys, tools, HART master).
Details the physical controls on the electronic insert for device settings.
Explains how to lock/unlock parameter write access using DIP switches.
Steps for configuring the NMT81 with specific Endress+Hauser devices.
Steps for configuring the NMT81 with NMS8x, NMR8x, and NRF81.
Describes accessing the menu using FieldCare or similar operating tools.
DTM specifications required for HART integration in FieldCare.
Lists measured values assigned to device variables at the factory.
Defines key terms relevant to temperature measurement in the device.
Basic initial settings required for the device.
Describes the layout and components of the initial screen in FieldCare.
Details the steps for performing initial measurement settings.
Procedures for importing and exporting device configuration data.
Explains switching between NMT81 and NMT53x operating modes.
Covers setting main parameters related to device application.
Confirms that temperatures, levels, and other measured values are correct.
Details sensor configuration including general settings and averages.
Configures HART communication parameters like address and tags.
Manages system-level device settings and descriptions.
Manages device tag, locking status, and configuration counter.
Describes how errors are signaled via symbols, colors, and codes.
Lists common errors, their causes, and remedial actions.
Details how to access and interpret diagnostic information.
Displays current diagnostic messages and operating time.
Allows simulating errors to test output behavior.
Covers general maintenance tasks, noting no special work is required.
Provides guidelines for cleaning the exterior of the measuring device.
Information on available maintenance, recalibration, and testing services.
Outlines the repair concept and general information.
Specific requirements and precautions for repairing Ex-approved devices.
Information on identifying and ordering spare parts for the device.
Lists accessories specifically designed for the device.
Details on the weather protection cover accessory and its ordering.
Information on the high profile anchor weight accessory.
Information on the low profile anchor weight accessory.
Specifications and dimensions for the top anchor accessory.
To Next Page
