Endress+Hauser Prothermo NMT81 - HART Output

Prothermo NMT81 Operation
Endress+Hauser 85
Present calibration
Present calibration shows the result of the current performed calibration as follows.
Confirm that the all values are shown appropriately.
A0044917
 89 Present calibration screen
10.2.4 HART output
Configuration
Configuration has four items to be set or confirmed as follows.
A0044915
 90 Configuration screen
• HART address: Shows the communication address of the device and NMT81 is usually
set to 2.
Setting range: 0 to 63
• HART short tag: Defines the name of the device to identify the device easily in the
master device.
Allowed characters type: 8 characters with A to Z, 0 to 9, and certain special characters
(***).
• Device tag (long tag): Defines the name of the device to identify the device easily.
Allowed characters type: 0 to 32 characters with A to Z, 0 to 9, and certain special
characters (***).
• No. of preambles: Defines the number of the bit when communicating with HART.
NMT81 is usually set to 5.
Setting range: 5 to 20
• If you select "with tag" when ordering the device, you can apply names to both short
or long tags.
• When changing the No. of preambles, the HART master must be set to the same
number as the NMT81.