Endress+Hauser Prothermo NMT81 - Page 86

Operation Prothermo NMT81
86 Endress+Hauser
HART output
HART output has four items to be set or confirmed as follows.
• PV stands for Primary dynamic Variable.
Assign PV from the pull-down menu as shown on the following figure.
• SV stands for Second dynamic Variable.
• TV stands for Tertiary dynamic Variable.
• QV stands for Quaternary Variable.
Assign QV from the pull-down menu as shown in the following figure.
A0044916
 91 HART output screen
Information
The information has eight items to be set or confirmed as follows.
A0044918
 92 Information screen
The information of the device ID, type, revision, and HART revision show the status of your
order.