Endress+Hauser Prothermo NMT81 - Access to Operating Menu via Operating Tool

Operability Prothermo NMT81
58 Endress+Hauser
7.8 Access to the operating menu via the operating tool
Accessing to the operating menu, there is one possibility:
3
2
1
A0044294
 50 Operation via service interface
1 Service interface (CDI = Endress+Hauser Common Data Interface)
2 Commubox FXA291, FXA195 (HART model)
3 Computer with "FieldCare" operating tool and "CDI Communication FXA291" or FXA195 (HART model) COM
DTM
The "Save/Restore" function
After a device configuration has been saved to a computer, save the data to the
computer using the Save/Restore function (Guidance → Import / Export → Save /
Restore)of FieldCare →  67, the device must be restarted by the following setting:
System → Device management → Reset device = Restart device.
This ensures correct operation of the device after the restore.