Prothermo NMT81 Operability
Endress+Hauser 57
Update water level
Item Details
Navigation Expert → Input/Output → HART device → HART device(s) → NMT device
configuration → Element configuration → Update water level(14757)
Description Determines whether or not the measured value of the water level via NMS8 is
reflected to NMT81.
• Enable
• Disable (when installing WB)
Factory setting Disable
Additional information Read access: Operator
Write access: Maintenance
Zero adjust
Item Details
Navigation Expert → Input/Output → HART device → HART device(s) → NMT device
configuration → Element configuration → Zero adjust (14735)
Description Adjusts the offset of the selected element.
Input unit Numerical value
Factory setting 0 (None)
Additional information Read access: Operator
Write access: Maintenance
Element temperature
Item Details
Navigation Expert → Input/Output → HART device → HART device(s) → NMT device
configuration → Element configuration → Element temp (14737)
Description Displays the element temperature.
Additional information Read access: Operator
Write access: -
Element position
Item Details
Navigation Expert → Input/Output → HART device → HART device(s) → NMT device
configuration → Element configuration → Element position (14738)
Description Adjusts the element position.
Input unit Numerical value
Factory setting -
Additional information Read access: Operator
Write access: Maintenance
To Next Page
Loading...
