Operability Prothermo NMT81
56 Endress+Hauser
Bottom point
Item Details
Navigation Expert → Input/Output → HART device → HART device(s) [MenuName] →
HART Device configuration → Bottom point (14729)
Description Displays the bottom-point temperature element.
Input unit Numerical value (mm)
Factory setting -
Additional information Read access: Operator
Write access: Maintenance
Select element
Item Details
Navigation Expert → Input/Output → HART device → HART device(s) → NMT device
configuration → Element configuration → Select element (14734)
Description The element to be configured is manually selected.
Input unit 1-16
Factory setting 1
Additional information Read access: Operator
Write access: Maintenance
NMT8NoElementInPhase
Item Details
Navigation Expert → Input/Output → HART device → HART device(s) → NMT device
configuration → Element configuration → NMT8NoElementInPhase (14756)
Description Alarm setting for detecting the situation when the none of elements are positioned in
either of vapor, product, nor water phase.
Factory setting Logbook entry only
Additional information Read access: Operator
Write access: Maintenance
Water bottom level offset
Item Details
Navigation Expert → Input/Output → HART device → HART device(s) → NMT device
configuration → Element configuration → Water bottom level offset (14757)
Description Enter an offset to adjust the output value of the water bottom probe.
Factory setting 0
Additional information Read access: Operator
Write access: Maintenance
To Next Page
Loading...
