Endress+Hauser Prothermo NMT81 - System

Prothermo NMT81 Operation
Endress+Hauser 87
• HART short tag: Defines the name for the measuring point.
Allowed characters type: 8 characters with A to Z, 0 to 9, and certain special characters
(***).
• HART descriptor: Defines descriptions for the measuring point.
Allowed characters type: 16 characters with A to Z, 0 to 9, and certain special characters
(***).
• HART message: Defines a HART message sent via HART protocol when requested by the
master device.
Allowed characters type: 32 characters with A to Z, 0 to 9, and certain special characters
(***).
• HART date code: Defines the last date of the configuration change.
Allowed characters type: 10 characters with 0 to 9, yyyy-mm-dd.
If you select "with tag" when ordering the device, you can apply names to both short or
long tags.
10.3 System
The System has six subordinate items to be set or confirmed and mostly shows the
descriptions of the device. This section sequentially describes the instructions of the
settings from the top. For further information of parameters, refer to the separate
"Description of Device Parameters" manual.
A0044919
 93 Initial screen of System