TI071D/06/en/10.09
71104953
Technical Information
Proline Promag 55S
Electromagnetic Flow Measuring System
Flow rate measurement of liquids with solids content or
inhomogeneous liquids
Application
Electromagnetic flowmeter for bidirectional meas-
urement of liquids with a minimum conductivity
of ≥ 5 μS/cm – in particular fluids with solids, and fluids
which are abrasive, inhomogeneous or tend to build-up,
for example:
• Chemical/mechanical pulps, paper pulp or wood pulp
with solids contents up to 15 Vol.-%
• Fruit mashes, fruit concentrates and final products
(salad dressings, soups with vegetable pieces)
• Slurries containing high amounts of sand or stone with
an abrasive effect, e.g. ore slurry or mortar
• Chemically inhomogeneous fluids (e.g. additives)
• Thick wastewater sludges
• Flow measurement up to 9600 m
3
/h
(42267 gal/min)
• Can be used up to +180 °C (+356 °F) and
max. 40 bar (580 psi)
• Fitting lengths as per DVGW/ISO
Application-specific linings and electrodes:
• Natural rubber, hard rubber, polyurethane, PTFE or
PFA linings
• Flat, bullet nose, neck, bow or brush electrodes
Approvals for hazardous area:
• ATEX, FM, CSA
Connection to process control system:
• HART, PROFIBUS PA, FOUNDATION Fieldbus
Your benefits
Promag measuring devices offer you cost-effective flow
measurement with a high degree of accuracy for a wide
range of process conditions.
The Proline transmitter concept comprises of:
• High degree of efficiency due to the modular device
and operating concept
• Software options for: electrode cleaning, advanced
diagnostics, calculation of mass flow and solids content
The robust Promag S sensors offer:
• Universal devices, even for difficult fluids
• Excellent accuracy and repeatability
• High resistance to abrasion thanks to industry-
optimized linings and measuring electrodes
• Optimum operational safety due to advanced,
permanent self-diagnosis
• Simple installation and commissioning
• Insensitive to vibration
• No pressure loss
To Next Page
Need help?
General
