Endress+Hauser prosonic flow 92 Technical Information

Prosonic Flow 92
Endress+Hauser 15
Materials Transmitter housing Prosonic Flow 92
• Handheld housing: plastic case
Flow measuring sensors W
• Sensor housing, nickel plated brass: 2.0401 (DIN 17660), C38500 (UNS)
• Sensor fixing brackets: 1.4301 (DIN 17440), 304 (AISI)
• Sensor contact surface: chemical resistant plastic
• Tensioning bands: textile
Flow measuring sensors U
• Sensor housing: plastic
• Sensor mounting rail: aluminum alloy/plastic
• Sensor contact surface: chemical resistant plastic
• Tensioning bands: textile
Sensor cables
• PVC
Human interface
Display elements • Liquid crystal graphic display
240 x 320 dot (with backlight)
• Custom configurations for presenting different measured values and status variables
• Supported language for display: English, German, French, Italian and Spanish
Operating elements 9 push buttons:
ON, OFF,  ,  ,  ,  , ESC, ENT, LIGHT
Serial communication RS-232C (not isolated)
• Transmission speed: max. 9600 BPS
• Max. cable length 15 m
Logging functions:
• Site data (name, piping, liquid, sensor mounting method, type of sensor) for up to 20 sites
• A maximum of 40000 data points (time, velocity, flow rate, totals, analog input, status) can be
stored in the memory.
Certificates and approvals
CE mark The measuring system is in conformity with the statutory requirements of the EC Directives.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
Other standards and
guidelines
EN 60529:
Degrees of protection by housing (IP code)
EN 61010:
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Labora-
tory Procedures.
EN 61326/A1 (IEC 1326) “Emmision to class A requirements”:
Electromagnetic compatibility (EMC requirements)
The power adapter is approved according to UL/UL-C and IEC 950.

Endress+Hauser prosonic flow 92 Specifications

General

Brand	Endress+Hauser
Model	prosonic flow 92
Category	Measuring Instruments
Language	English