Prosonic M
36 Endress+Hauser
Product structure FMU43
010 Certificates
A Variant for non-hazardous area
2 ATEX II 1/2D, Alu blind cover
5ATEX II 1/3D
M FM DIP Cl.II Div.1 Gr.E-G, NI Cl.I Div.2, Zone 2
N CSA General Purpose
P CSA DIP Cl.II Div.1 Gr.E-G, NI Cl.I Div.2, zone 2
QNEPSI DIP
YSpecial version
020 Process connection/material
P Flange DN 100/ANSI 4"/JIS 16K100, PP (universal slip-on flange included)
S Flange DN 100/ANSI 4"/JIS 16K100, SS 316TI (universal slip-on flange included)
K Without slip-on flange/without mounting bracket (customer mounting equipment)
M With mounting bracket FAU20
YSpecial version
030 Power supply/communication
H 4 wire, 10,5...32VDC / 4-20mA HART
G 4 wire, 90...253VAC / 4-20mA HART
D 2 wire, PROFIBUS PA
F 2 wire, FOUNDATION Fieldbus
J 2-wire; 4-20mA HART, 5-point linearity protocol (in preparation)
K 2-wire; PROFIBUS PA, 5-point linearity protocol (in preparation)
L 2-wire; FOUNDATION Fieldbus, 5-point linearity protocol (in preparation)
M 4-wire 90-250VAC; 4-20mA HART,5-point linearity protocol (in preparation)
N 4-wire 10.5-32VDC;4-20mA HART,5-point linearity protocol (in preparation)
Y Special version
040 Display / on-site operation
1 Without LC display
2 4-line display VU331, Envelope curve display on site
3 Prepared for remote display FHX 40
9 Special version
050 Housing
A Aluminium F12 housing coated to IP 68 NEMA 6P
9Special version
060 Screw union/entry
2 M20x1.5 screw union
3G 1/2“ entry
4 NPT 1/2“ entry
5 M12 PROFIBUS-PA plug-in connector
6 7/8" FF plug
9 Special version
995 Marking
1 Tagging (TAG)
2 Bus address
FMU43 - Product designation
To Next Page
Loading...
