Endress+Hauser prowirl 77 - Device Functions; Commuwin II Operating Matrix

6 Device Functions
6.1 Commuwin II operating matrix
Transmitter “Device Block”
The configurable parameters of this matrix are described in chapter 6.2.
H0 H1 H2 H3 H4 H5 H6 H7 H8 H9
V0 MEASURED
VALUE
FLOWRATE VORTEX
FREQUENCY
TOTALIZED VOL.
V1 SYSTEM-
UNITS
FLOW UNIT VOLUME
UNIT
V2 V3 V4 DISPLAY
RESET TOTALIZER
V5 SYSTEM
PARA M E TE R
BUS ADDRESS ACCESS CODE DIAGNOSTIC
CODE
LAST DIAGNOSTIC CODE
SOFTWARE VERSION
HARDWARE VERSION
V6 SENSOR DATA
APPLICATION NOMINAL
DIAMETER
CALIBR. FACTOR
EXPANSION COEFF.
TEMPERATURE ENTRY
SELECT GAIN RANGE
V7 V8 V9 VA SETUP
TAG NUMBER SERIAL
NUMBER
DEVICE PROFILE
Programming is enabled by entering the access code (see page 39).
Prowirl 77 PROFIBUS-PA 6 Device Functions
Endress+Hauser 29