CLEANING
Remove dust on the treadmill with a vacuum or a slightly damp cloth. Folding up the deck
and cleaning the oor with a vacuum periodically will help prolong the treadmill product life.
Never use solvents on the deck or running belt. The use of solvents can reduce critical
lubrication of the deck and belt.
RUNNING BELT CENTERING
When you run or walk, you may push off harder with one foot than the other. This will cause
the running belt to eventually run off-centered. This treadmill is designed and built to ensure
proper tracking of the belt and insure it is always centered on the deck. Occasionally, the belt
may need further adjustment to keep it centered. To center the belt, use the enclosed Allen
wrench to properly adjust the rear roller’s position.
The running belt adjustment bolts are shown in the picture below.
To reduce the risk of electrical shock, always unplug the treadmill from the electrical
outlet immediately after use and before maintenance!
Running Belt Adjustment Bolts
Maintenance
28
To Next Page
Loading...
