26 27
3.6 Meter configuration
Configuration is carried out according to САНТ.411152.068-05.1 РП, which is available at the manufacturer’s
website:
www.energomera.ru/ru/products/meters/ce208-all.
4 READING THE METER
The meter can be read both manually and in the automated mode.
In the automated mode, full information on energy consumption can be obtained using a PC or AMI system via
the interface.
In the manual mode, data is displayed on the LCD in a window eight decimal places wide (with a decimal point).
4.1 Displaying information on the LCD
4.1.1 A complete list of output formats of measured, calculated and accumulated parameters is given in Table 4.1.
The measurement units of the displayed energy/power values are indicated respectively as «kW•h» «kVAr•h»,
«MW•h» «MVAr•h» or «MkW•h» «MkVAr•h», respectively, and characterize the type of indicated energy,
respectively: active and reactive.
To Next Page
Loading...
