Need help?Do you have a question about the ENERMAX ELC-LMT120-RGB and is the answer not in the manual?
General| Type | Liquid CPU Cooler |
|---|---|
| Radiator Size | 120mm |
| Radiator Material | Aluminum |
| Radiator Dimensions | 154 x 120 x 27 mm |
| Fan Size | 120mm |
| Fan Dimensions | 120 x 120 x 25 mm |
| RGB Lighting | Yes |
| Fan Connector | 4-pin PWM |
| Pump Connector | 3-pin |
| Warranty | 2 Years |
| Socket Compatibility | Intel LGA 115x, AMD AM4 |
| Fan Speed | 500 - 2000 RPM |
Attach the fan and the radiator to the chassis.
Install the Intel clip to the pump.
Insert position screws and washers into the back plate.
Apply the thermal grease evenly on the CPU surface.
Connect the pump power connector to the motherboard.
Attach the fan and the radiator to the chassis.
Install the AMD clip to the pump.
Insert position screws into the back plate.
Apply the thermal grease evenly on the CPU surface.
Place the pump on the CPU and tighten spring screws.
Connect the sync cable to a supported motherboard with RGB header.
To Next Page
