© 2019 ENERMAX TECHNOLOGY CORPORATION. All right reserved.
Specifications are subject to change without prior notice. Some trademark may be claimed as the property of others.
Chapter 1 – Specifications Chapter 2 – Part List
Chapter 3 – Fan Pack Installation Guide
Fan x 3
RGB Control Box x 1 Contorl Box Power
Cable (SATA) x 1
ARGB 3 to 1 Cable
x 1
PWM 3 to1
Cable x 1
GIGABYTE
ARGB Adapter
x 1
Molex Adapter
x 1
Screw x 12
*Notice: Actual specifications / product parts may vary according to different regions or countries.
※ Product specifications are subject to change without prior notice.
※ For detailed information, please visit our website at www.enermax.com.
Model Number
Dimension (mm)
Speed (RPM)
Air Flow (CFM)
Air Flow (m
3
/h)
Static Pressure (mm-H
2
O)
Minimal Noise (dBA)
Rated Current- Fan (A)
Rated Current- ARGB LED (A)
Rated Voltage (V)
ARGB Rated Voltage (V)
MTBF (hours)
Connector
Accessory
UCSQARGB12P-BP3
120(W) x 120(H) x 26(D)
300 ~ 1500 (±10%)
24.53 ~ 68.27
41.67 ~ 115.99
0.17 ~ 1.898
12 ~ 23
0.21
0.68
12
5
≧100,000 hours @ 25°C
1x 4 pin PWM connector, 1x 4 pin ARGB connector (5V/D/-/G)
1x RGB control box, 1x ARGB 3 to 1 cable (5V/D/-/G),
1x GIGABYTE ARGB adapter, 1x PWM 3 to 1 cable,
1x Molex adaptor, 12x Screw
Product model: UCSQARGB12P-BP3
Magnetic
Adhesive x 1
(For Control Box)
G
D
5V
Fan
PWM 3 to 1 cable
PWM Header
* Use PWM 3 to 1 cable to connect 3 fans,
then connect the fan connector to the
PWM header on the motherboard.
PWM 3 to1 Cable
ARGB 3 to 1 Cable
※ Integrated RGB Control Box ※
PSU(not included in the package)
Contorl Box Power
Cable (SATA)
RGB Control Box
Caution: Max. current of RGB Control Box is 3A.
※ Addressable Motherboard Sync ※
Motherboard (not included in the package)
+5V
D
G
Addressable RGB
Header
Please ensure it is properly the connector to the motherboard.
5V
D
G
For RGB lighting Sync, two ways to
demonstrate the lighting.
1. Integrated RGB Control Box.
2. Addressable Motherboard Sync.
To Next Page
Need help?
General
Weight and Dimensions
