Need help?Do you have a question about the ENERMAX LIQTECH TR4 Series and is the answer not in the manual?
General| Type | Liquid CPU Cooler |
|---|---|
| Radiator Material | Aluminum |
| Fan Dimensions | 120 x 120 x 25 mm / 140 x 140 x 25 mm |
| Connector | 4-pin PWM |
| Voltage | 12V |
| MTBF | 50, 000 hours |
| Weight | 1.5 kg |
| Socket Compatibility | TR4 |
| Radiator Size | 360mm |
| Pump Speed | 3, 000 RPM |
| Fan Size | 120mm |
| Fan Speed | 500 - 2300 RPM |
| Fan Noise Level | Up to 30 dBA |
| Power Consumption | 2.4W |
Highlights 100% IHS coverage, 500W+ TDP support, and editor awards.
Loosen CPU socket screws in the specified sequence 3→2→1.
Release the CPU rail frame by pulling up on blue tabs and remove the internal plastic cover.
Install CPU with carrier, align rail, secure retention cover, and tighten screws in order.
To Next Page
