Need help?Do you have a question about the ENERMAX Liqtech 240 and is the answer not in the manual?
Attach the Intel back plate to the motherboard rear and secure with stand-offs.
Fasten the LGA2011 specific screws to the motherboard for back plate stability.
Apply a thin, even layer of thermal grease onto the CPU surface.
Position the pump on the CPU and tighten all four spring screws firmly.
General| Radiator Size | 240 mm |
|---|---|
| Pump Type | Ceramic bearing pump |
| Fan Size | 120 mm |
| Fan Speed | 500 - 2000 RPM |
| Radiator Material | Aluminum |
| Radiator Dimensions | 274 x 120 x 27 mm |
| Fan Dimensions | 120 x 120 x 25 mm |
| Tube Length | 400 mm |
| Warranty | 2 years |
| Compatibility | AMD AM4/AM3+/AM3/AM2+/FM2+/FM1 |
| Socket Compatibility | LGA 2066/2011-3/2011/1366/1156/1155/1151/1150/775, AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 |
To Next Page