enervent Svea eAir - Page 35

35Installation instructions for professionals
Weekdays Every day Set the weekday or days for summer night cooling.
Active cooling
blocked
ON Options are ON/OFF. If this setting is on, no active
cooling is allowed.
11 Supply air 20 % This value denes the supply air fan speed in Away
operating mode.
Extract air 20 % This value denes the extract air fan speed in Away
operating mode.
Temperature setback 2°C This value denes the temperature drop in the
temperature set-point when Away operating mode
is on.
Heating ON Options are ON/OFF. This setting denes whether
or not after heating is allowed in Away operating
mode.
Cooling ON Options are ON/OFF. This setting denes whether
or not active cooling is allowed in Away operating
mode.
12 Boost duration 30 min This setting denes the time the fan speed is
boosted.
Supply air 90 % This is the speed at which the supply air fan will be
running when manual boosting is activated.
Extract air 90 % This is the speed at which the extract air fan will be
running when manual boosting is activated.
13 Overpressure
duration
10 min This setting denes the time the overpressure is
active.
Supply air 50 % This is the speed at which the supply air fan will be
running when manual overpressure is activated.
Extract air 30 % This is the speed at which the extract air fan will be
running when manual overpressure is activated.