EasyManua.ls Logo

ENFORCER E-921CPQ - Table of Contents; Features

ENFORCER E-921CPQ
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENFORCER Voice Dialer
2 SECO-LARM U.S.A., Inc.
Features:
Trigger-activated alarm and dialer with user-programmable 20-second alarm message
16-Digit large display with date/time and function icons
3 Triggers (1 N.C., 2 NO/NC) for multiple zone security
Call in at any time to listen in to room, broadcast to room, arm, and disarm dialer
Listen in, broadcast messages to room, and/or disarm during dialer call out
Programmable PIN number and entry delay timing
5 Programmable emergency telephone numbers (up to 32 digits each)
Programmable auto-dialing cycle repeat times
Home mode function (acts as a door chime when user is at home)
Panic button
Back-lit keypad
Built-in flash memory to protect against system data loss in case of power failure
Touch-Tone dialing
Low-battery indicator for backup battery (battery not included)
DC power input jack (power adapter not included)
9V battery backup (battery not included)
Wall-mountable
Built-in 105dB alarm (with programmable alarm on/off)
Built-in auxiliary output for external alarm or siren
Built-in line seizure
Table of Contents:
Features ......................................................... 2
Parts List ......................................................... 3
Specifications ................................................. 3
Wiring Diagram ............................................... 3
Overview ......................................................... 4
LCD Screen Layout ........................................ 4
Installing the Voice Dialer ........................... 4~5
Programming the Voice Dialer .................... 6~9
Setting and Changing the PIN Number ...... 6
Setting Emergency Phone Numbers ...... 6~7
Deleting a Stored Phone Number ............... 7
Setting the Siren Function .......................... 7
Setting the Auto Dial Function .................... 8
Setting the Number of Auto Dial Cycles ..... 8
Setting the Number of Call-in Rings ........... 8
Setting the Entry Delay Time ...................... 9
Setting the Date and Time .......................... 9
Record and Play Back Emergency
Message ..................................................... 9
Testing the Auto Dial Function ...................... 10
Resetting the Voice Dialer ............................ 10
Line Seizure .................................................. 10
Operating the Voice Dialer ...................... 10~13
Arming and Disarming the System ..... 10~11
Panic Button Use ...................................... 11
Remote Control by Telephone ............ 11~12
Home Mode Use ....................................... 13
Low-Battery Indicator ................................ 13
View Function ........................................... 13
Tips ............................................................... 13
Program Planner ........................................... 14
FCC Part 68 .................................................. 14
Summary Programming/Operation Chart ..... 15
Also Available from SECO-LARM
®
........ 15
Troubleshooting ............................................ 16

Related product manuals