ENFORCER E-921CPQ - Overview and Installation; Overview; LCD Screen Layout; Installing the Voice Dialer

ENFORCER Voice Dialer
4 SECO-LARM U.S.A., Inc.
Overview:
LCD Screen Layout:
Front
Back (Covers Removed)
LCD Display
Speaker
REC/PLAY LED
LOW BATT LED
POWER LED
Numeric Keypad
Microphone
LINE Jack
TEL Jack
Buzzer
Terminal Block (with Trigger 3 Jumper)
DC Power Jack
Battery Receptacle
Reset Button
Note: For explanation of symbols, please see Programming the Voice Dialer on pages 6~9.
Installing the Voice Dialer:
Siren Alarm
Auto Dial
Call-Back Rings
Home Mode
A
ctivated
Alarm Triggered
Time/Date
PASSWORD MEMORY LEARN

CYCLE ENTRY

2017-01-01 12-00
ARM
TRIGGER HOME
Armed or
Disarmed
Note: You can pro
g
ram the telephone numbers and voice messa
g
es prior to connectin
g
the power
as long as the 9V battery is installed. The standby battery should provide about 20 hours of
operation.
Note: The Voice Dialer uses EEPROM to retain memory in the event of a power loss.