Need help?Do you have a question about the ENFORCER SK-1123-SPQ and is the answer not in the manual?
Details electrical connections for basic installation of the keypad.
Crucial warnings and precautions for safe installation and operation.
Specifies the purpose and connection for each terminal on the keypad.
Procedures for accessing and leaving the keypad's programming interface.
Procedure to set or change the master code for programming access.
Sets or changes the super user code for advanced control.
Adds or manages individual user codes and proximity cards.
Configures codes that trigger a silent alarm when used under duress.
Sets how outputs activate (toggle or timed) and for how long.
Configures scheduled disabling of output #1.
Configures keypad lockout after multiple incorrect entries.
Procedure to reset the master code if forgotten.
Details electrical connections for basic installation of the keypad.
Crucial warnings and precautions for safe installation and operation.
Specifies the purpose and connection for each terminal on the keypad.
Procedures for accessing and leaving the keypad's programming interface.
Procedure to set or change the master code for programming access.
Sets or changes the super user code for advanced control.
Adds or manages individual user codes and proximity cards.
Configures codes that trigger a silent alarm when used under duress.
Sets how outputs activate (toggle or timed) and for how long.
Configures scheduled disabling of output #1.
Configures keypad lockout after multiple incorrect entries.
Procedure to reset the master code if forgotten.
General| Model | SK-1123-SPQ |
|---|---|
| Wired/Wireless | Wired |
| Number of Keys | 12 |
| Backlit | Yes |
| PIN Length | 4-6 digits |
| Weatherproof Rating | IP65 |
| Material | Zinc alloy |
| Type | Keypad |
| Compatibility | Works with most access control systems |
| Operating Voltage | 12-24V DC |
| Number of Users | 1000 |
| Operating Temperature | -4°F to 158°F (-20°C to 70°C) |
| Voltage | 12V DC |
To Next Page
