C
Christopher MillerAug 1, 2025
What to do if Engbo MAXI 31 windlass does not work or pulls very poorly?
- JJohn SerranoAug 1, 2025
If your Engbo boating equipment windlass isn't working well, start by checking the main power supply. Measure the voltage in the battery cables at the point where they connect to the windlass while it's running. If the voltage is less than 10.5V, investigate the cause. Inspect all connection points, including the main switch, fuse, battery shoes, and the battery's overall condition and voltage. If the voltage is above 10.5V but the motor still doesn't work, the electronic protection function might have shut it down due to prolonged use or overload. Let it cool down for about 20 minutes before trying again.