55
8.2 Management VLAN Settings
This page allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software
has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on VLAN do
not have to be physically located next to one another on the LAN.
Management VLAN (Access Point / WDS mode)
Specify the VLAN tag for each profile.
If your network includes VLANs, you can specify a VLAN ID for packets pass through the Access
Point with a tag. Otherwise, select No VLAN tag.
Click Save to confirm the changes.
Note: Only applicable in Access Point and WDS AP mode.
Note: If you reconfigure the Management VLAN ID, you may lose your connection to the ECB1750. Verify that the DHCP server supports the
reconfigured VLAN ID and then reconnect to the ECB1750 using the new IP address.
To Next Page
Loading...
Need help?
General
