EnGenius ETR9350 - Page 101

100
Destination
Subnet Mask
Gateway
Hop
Interface
192.168.1.0
255.255.255.0
192.168.123.216
1
LAN
192.168.0.0
255.255.255.0
192.168.123.103
1
LAN
So if, for example, Client3 wants to send an IP data packet to 192.168.0.2 (Client 2), it would use the above table to determine that it
had to go via 192.168.123.103 (Router 2)
And if it sends Packets to 192.168.1.11 (Client 1) will go via 192.168.123.216 (Router 1).