Page 14
Omniguard™ 4 Owner’s Manual
Page 15
Engineering Solutions Inc
Print Job Key --
Pressing PRINT JOB will print the selected report time frame for the
current Job. This makes it easy to print a particular portion of the
current Job on a regular basis.
To setup a report time frame --
1. Press MENU to view the Main Menu.
2. Highlight PRINT JOB KEY SETUP using ▲/▼ and press
SELECT.
3. Using ▲/▼ highlight the time frame desired and press SAVE.
To view or print a Job Log --
1. Press MENU to view the Main Menu.
2. Highlight VIEW/PRINT JOB LOGS using ▲/▼ and press
SELECT.
3. Using ▲/▼ highlight either CURRENT JOB or ALL JOB LOGS
4. The selected Job Log will appear on the screen for viewing. Press
the PRINT JOB key at any time while viewing the report and the
Job Report will begin printing.
When the containment pressure returns to within the normal operating
window, the unit will log and print NORMAL OP with a time-stamp.
The buzzer and accessories (if present) will turn off, also a Normal
Operation status message will be sent to off-site personnel if the WiFi
Adapter or Cellular Wireless Modem is present. The STATUS LED
will return to a steady green.
Alarm Silence, Disable and Rearming
The buzzer symbol on the Monitor Screen indicates whether the
internal audible alarm (and optional Remote Auxiliary Alarm if present)
is armed or disabled. The alarm is always armed when the unit is first
turned on. The alarm silence function is controlled by the ALARM
SILENCE key.
To disable or silence the buzzer (and Remote Auxiliary Alarm) --
Press ALARM SILENCE once and the alarm will be
disabled. This will be indicated on the screen with an X
marking through the buzzer symbol.
To rearm a silenced buzzer (and Remote Auxiliary Alarm) --
Press ALARM SILENCE and the buzzer symbol will be
displayed without an X through it.
Turning Printer On/Off
The PRINTER ON/OFF key controls the printer power. All pressure
readings are logged to memory regardless of printer setting.
Note: If a printer error is detected, the printer will
automatically turn off and a JAM message will
appear above the printer symbol. Clear the jam
and use the PRINTER ON/OFF key to turn the
printer back on. Paper jams are logged with a
time-stamp.
Example of Typical Job Printout
Typical startup sequence
Setting changes print for verification
Containment pressure reached
operating window... Normal OP
Alarm Condition (Alarm 1 tripped)
Back into Normal Operation
New Date prints at midnight
Sign off header
POWER OFF
10-21-08 19:48:39
CURRENT JOB
Johnson Bldg
OMNIGUARD 4
10-26-08 08:02:20
ALARM 1 @ -0.025" WC
ALARM 2 @ -0.100" WC
NEW TIME
05:38:00
NEW ALARM 2
-0.090" WC
NORMAL OP 05:51:24
TIMEHI "WCLO "WC
06:06 -0.032 -0.028
06:21 -0.031 -0.027
06:36 -0.033 -0.028
ALARM 1 @-0.025" WC
08:51:26 -0.012" WC
08:51:41 -0.002" WC
NORMAL OP 08:51:55
TIMEHI "WCLO "WC
09:06 -0.032 -0.028
10-27-08
TIMEHI "WCLO "WC
00:06 -0.032 -0.028
JOB REPORT
10-27-08 08:33:24
JOB NAME:
Johnson Bldg
____________________
CONTRACTOR:
Acme Abatement
____________________
SUPERVISOR:
____________________
og4a job report printout
JOB SUMMARY
JOB NAME:
Johnson Bldg
JOB START:
10-26-08 05:38
JOB END:
11-01-08 17:09
TIME IN NORMAL OP:
6 days 10 hrs 23 mins
NUMBER OF ALARMS:
2
TIME IN ALARM:
16 mins 28 secs
og4a job summary printout
Example of Job
Summary Printout
Alarm Symbols
Armed
Disabled or
Silenced
Jammed
On
Off
Printer Symbols
Viewing/Printing Jobs & the Print Job Key
The Omniguard 4 provides a printout of all recorded data, alarm
messages and changes in operational settings. The current Job or
any previous Job (or portions of those jobs) and the Omniguard’s
Configuration Report can be printed at anytime.
Cancel printing by pressing any key.
To Next Page
Loading...
