Envoy Installation and Operation
2013 Enphase Energy Inc. 141-00011 Rev 05
Enabling a Connection to Enphase
The Enable Connection to Enphase menu item creates a secure connection to Enphase allowing
Enphase personnel to troubleshoot the system remotely.
To open a connection to Enphase:
1. Press and hold the Envoy Menu button. After two seconds the Envoy menu appears.
2. Continue holding the Menu button. When the LCD screen displays “Enable Connection to
Enphase”, release the Menu button.
The LCD screen now reads:
Once the connection is open, the LCD will return to the default display.
Disabling a Connection to Enphase
The Disable Connection to Enphase menu item closes the secure connection to Enphase.
To close a connection to Enphase:
1. Press and hold the Envoy Menu button. After two seconds the Envoy menu appears.
2. Continue holding the Menu button. When the LCD screen displays “Disable Connection to
Enphase”, release the Menu button.
The LCD screen now reads:
Once the connection is closed, the LCD will return to the default display.
Disable Connection
To Enphase
Enable Connection
To Enphase
To Next Page
Loading...
