enphase IQ7-B1200-LN-I-INT01-RV0 User Manual

© 2019 Enphase Energy Inc.
3
Table of Contents
SAFETY ................................................................................................................................................. 4
In Case of Fire or Other Emergency ...................................................................................................... 4
Safety Instructions ................................................................................................................................. 4
The Enphase AC Battery ...................................................................................................................... 7
Planning ................................................................................................................................................ 8
Preparation ........................................................................................................................................... 8
Installing the AC Battery .................................................................................................................... 10
1. Choose a Location for the AC Battery ............................................................................................ 10
2. Install the Wall-Mount Bracket ........................................................................................................ 11
3. Install the AC Isolator (if required) .................................................................................................. 12
4. Wire the Junction Box...................................................................................................................... 13
5. Mount the AC Battery on the Wall ................................................................................................... 14
6. Energise and Commission the System ........................................................................................... 15
Operation ............................................................................................................................................ 16
Charging and Discharging ................................................................................................................... 16
LED Overview ....................................................................................................................................... 16
Troubleshooting ................................................................................................................................. 17
LED is Rapidly Flashing Yellow or Not Lit ........................................................................................... 17
Battery Information is Incorrect or Absent in Installer Toolkit or Enlighten ..................................... 17
Check the Internet Connection ..................................................................................................... 17
Run a Device Scan......................................................................................................................... 17
Relocate the Envoy ........................................................................................................................ 17
Ensure that Meters are Properly Configured ............................................................................... 18
Ensure that the Grid Profile and Rate Tariff are Set .................................................................... 18
Enable Charging From and Discharging To the Grid ......................................................................... 18
Battery LED is Off or Flashing Red ...................................................................................................... 18
Battery LED is Solid Yellow .................................................................................................................. 19
System Alert: “AC Battery(ies) with Critical Temperature” ................................................................ 19
Removing or Replacing an AC Battery .............................................................................................. 20
Removing the AC Battery .................................................................................................................... 20
Re-installing the AC Battery ................................................................................................................. 21
Replacing the AC Battery ..................................................................................................................... 22
Technical Data .................................................................................................................................... 24

enphase IQ7-B1200-LN-I-INT01-RV0 Specifications

General

Brand	enphase
Model	IQ7-B1200-LN-I-INT01-RV0
Category	Camera Accessories
Language	English