Need help?Do you have a question about the Enplus EVO UPS 6000VA and is the answer not in the manual?
General| Capacity | 6000VA |
|---|---|
| Frequency | 50/60 Hz |
| Operating Temperature | 0-40°C |
| Storage Temperature | -15-45°C |
| Input Voltage | 220/230/240VAC |
| Output Voltage | 220/230/240VAC |
| Battery Type | Sealed Lead Acid, Maintenance-free |
| Battery Recharge Time | 4-6 hours |
| Communication Interface | RS232, USB |
| Humidity | 0-95% non-condensing |
Units with CE mark comply with standards like EN 62040-1-1, EN 62040-2, and EU Directives.
Covers CAUTIONs regarding internal batteries, non-serviceable parts, non-isolated supply, fuses, and battery handling.
Explains UPS purpose in protecting sensitive equipment from power quality issues and disturbances.
Feature enabling automatic mode switching for cost effectiveness and power saving.
Handle with caution due to battery energy; keep unit upright, avoid drops.
Avoid flammable substances/airtight rooms; electrical hazards can be fatal.
Instructions for connecting UPS to mains and loads, emphasizing qualified personnel and safety.
Ensure proper connections, isolate source, check breakers, refer to diagrams for single/dual cable input.
Table detailing circuit breaker and wiring AWG/mm for 6000VA and 10000VA models.
Describes RS232, USB, and optional interface cards for communication and monitoring.
Step-by-step guide for powering the UPS on and off, including load management.
Explains the functionality of the ON/OFF and STATUS buttons on the front panel.
Describes the different audible alarms for battery status, overload, and faults.
Table listing common problems, their alarms, and recommended solutions or actions.
Emphasizes environmental factors, electrical hazards, and proper battery replacement procedures.
To Next Page