Enplus EVO UPS 6000VA - UPS Shutdown Procedures (6~10 KVA); Step-by-Step Shutdown Process

45
6~10KVA
UPS Shutdown procedures :
STEP 1:
From the front panel, press and hold “ON/OFF” button to 2 seconds until hear a long beep
sound and see “SHUTDOWN” on the screen. The release ON/OFF button, later you will see
“UPS OFF” text appears and disappears.
STEP 2:
While display panel shows no text but only backlight, turn off input breaker.
STEP 3:
After turning off input breaker, turn off battery breaker until all fans stop to complete the
VGD shutdown procedures.