9
Maintenance bypass switches
Connectivity options (relay card, SNMP/WEB card)
The following UPS models are available
Model
Backup time
Internal batteries
Recharge time to 90% capacity
UPS 6000VA 4~6min 4 hours
UPS 10000VA 3~5min 4 hours
Additional External Battery Cabinets are available if more back-up time is needed.
3. Safety information
Information presented here is vital to all personnel and please also read the UPS safety
manual.
Storage and Transportation
Please handle with extreme caution since a high amount of energy is contained with the
batteries. Always keep the unit in position as marked on the packaging and never drop the
unit.
Installation
If flammable substances such as gases or fumes are present or if the room is airtight, a safety
hazard situation exists, in which no electrical equipment should be operated.
The instructions in this manual explain how to install the UPS safely. Not acknowledging
such electrical hazards may be fatal, so keep this manual for all future reference.
WARNING!
It is strongly advisable not to open the UPS cabinet as the components have very
high voltage and touching them may be fatal. Only a technician from the
manufacturer or an authorized agent may service the unit.
This UPS unit’s output receptacles carry live voltage even when not connected to
a power supply as it has its own energy source.
To Next Page
Loading...