INSTALLATION
Blanket Warmer ▪ Operat or’s Manu a l ▪ MN -3 9 92 4 ▪ Rev 4 ▪ 8/20
29
INSTALLATION
How to Unpack the Warmer
Before you begin Make sure you have:
▪ Reviewed the warmer specifications.
▪ An appropriate lifting device and enough personnel to safely move and position
the weight of the warmer.
▪ Cutting tools to remove the packaging.
Unpack the warmer To unpack the warmer, do the following.
Step Action
1. Remove the box or crate. Save all packing materials for inspection by the
carrier.
2. Cut and remove the retaining straps and plastic wrap.
3. Remove the warmer from the pallet using an appropriate lifting device.
4. Remove the paperwork from the cavity.
Result The warmer is now unpacked.
WARNING: Crushing hazard.
An unstable warmer can lead to a crushing hazard. Observe your
facility’s best practices for moving large equipment.
NOTE: Examine the warmer for damage. If the warmer has
been damaged, do not use the warmer until it has been
inspected by an authorized service provider. Contact your
carrier or customer service.
To Next Page
Loading...
