Enthermics DC400 - How to Change the Temperature Scale; How to Change the Sound Settings

OPERATION
Blanket Warmer ▪ Oper a tor’s Ma nu al ▪ M N- 39 9 2 4 ▪ Rev 4 ▪ 8/20
36
How to Change the Temperature Scale
Before you begin The warmer must be connected to electric power and the screen turned off.
Procedure
To change the temperature scale from °F to °C and vice versa, do the following.
Step Action
1. Press and hold the standby button until the screen turns off, then
release the button.
2. Press and hold the temperature recall button until the temperature
digits disappears and only the F or C display, then release the button.
3. Press the up and down arrow buttons to toggle between the
temperature scales.
4. Press the standby button to turn the screen on.
Result The temperature scale has now been changed.
How to Change the Sound Settings
Before you begin The warmer must be connected to electric power.
Procedure
To change the sound settings, do the following.
Step Action
1. Press and while holding the temperature recall button , press the
down arrow button .
Once the sound volume setting displays, release both buttons.
2. Press the up and down arrow buttons to adjust the volume.
The volume range is 0 (mute) to 12 (maximum).
3. Press the standby button to turn the screen on.
Result The sound setting has now been changed.