INSTALLATION
Blanket Warmer ▪ Operat or’s Manu a l ▪ MN -3 9 92 4 ▪ Rev 4 ▪ 8/20
31
Continued from previous page
2. Move the warmer to the installation location and onto the final resting
surface.
3. Lock the casters, if equipped.
The warmer is now correctly positioned.
Connect power
To connect electric power to the warmer, do the following.
4. Connect the plug to the electrical outlet.
Result The warmer is now installed and ready to be used.
To Next Page
Loading...
